|
|
Baker Electronix
TSD/ATSD
(Tachometer Signal Divider)/(Adjustable-TSD)
Also Known as the Tachometer Adaptor
The ATSD module is essential for anyone who is installing an engine into a vehicle that was equiped with a tachometer designed for an engine with a different number of cylinder. The ATSD module divides, or multiplies, the tachometer signal's frequency. The TSD/ATSD also converts the single to a standard 0V to 12V pulse to operate your original stock tachometer. The ATSD comes with eight standard settings, that you can switch between.
Download the TSD/ATSD manual for more information.
The non-adjustable (TSD module) only comes with one setting that you must specify when you order. Download the TSD/ATSD manual for more information.
Features:
- Microcontroller based for reliability and accuracy
- Waterproof
- Reverse voltage protection in the event of incorrect power connections
- Short circuit protection on all inputs and outputs to 12V or ground
- Operating voltage from 8V to 25V
- Light weight (31g)
- Small package(5.4 cm x 3.5 cm x 1.5 cm)
- 12-Month Warranty from date of purchase against manufacturer defects
If you live in the U.S. and you wish to purchase 4 or less modules, you can purchase via Credit Card or PayPal by using the buttons below. Your order will ship to you via USPS Priority Mail.
If you live outside the U.S. or want to purchase 5 or more modules or would like a different shipping method, please email us (at shipping@bakerelectronix.com) for a quote. Please include the following in your email - your module selection, quantity and your full shipping address.
For technical questions please email us at tech@bakerelectronix.com.
Purchase the TSDr for $40 + S&H
Purchase
the ATSD for $50 + S&H
Add
The Quick Disconnect Upgrade For $10 More
|
Back to Top
Baker Electronix
TSI
(Tachometer Signal Inverter)
The TSI module converts a standard 0 – 12v coil type tachometer signal into a 0 - 5v tachometer signal by inverting and reducing the input pulses. This module provides no frequency adapting, if frequency adapting is needed the TSD or ATSD are also available.
Features:
- Reverse voltage protection in the event of incorrect power connections
- Short circuit protection on all inputs and outputs to 12V or ground
- Waterproof
- Inverts signals from 0 Hz to 5,000 Hz (0 - 75,000 RPM with a V8)
- Low current (5 - 15mA)
- Indicator LED to confirm that module has power
- Works from 8V to 25V supply voltage
- Light weight (31g)
- Small package (5.4cm x 3.5 cm x 1.5cm)
- 12 month warranty from date of purchase against manufacturer defects
If you live in the U.S. and you wish to purchase 4 or less modules, you can purchase via Credit Card or PayPal by using the buttons below. Your order will ship to you via USPS Priority Mail.
If you live outside the U.S. or want to purchase 5 or more modules or would like a different shipping method, please email us (at shipping@bakerelectronix.com) for a quote. Please include the following in your email - your module selection, quantity and your full shipping address.
For technical questions please email us at tech@bakerelectronix.com.
Purchase the TSI for $40 + S&H
Add
The Quick Disconnect Upgrade For $10 More
|
| | 